金属溶解炉の安全操業
1. Before starting the furnace, check whether the electrical equipment, water cooling system, sensor copper tube, etc. are intact, otherwise, it is forbidden to start the furnace. 2. Furnace melting
テンパリング中の一般的な問題は何ですか?
1. The chemical composition of the material, the same brand of material, the chemical composition may be different, it must be different quenching temperature, 2. Shape of the workpiece. For
金属焼戻し熱処理はどうですか?
Quenching and high temperature tempering:: namely the comprehensive heat treatment process of quenching and tempering at high temperature. Tempering parts mostly work under relatively large dynamic load, they bear the
金属の熱処理工程とは?
Annealing The heat treatment process in which steel specimens are heated to an appropriate temperature, and then cooled slowly after holding for a certain period of time, so as to
金属の熱処理に関する110の質問 (パート5)
81.What is the cause of outlet flap failure? The outlet flap connecting shaft deforms and falls off, so the steel pipe on the diagonal arm cannot be sent to the
誘導ろう付けアルミニウム
Induction brazing aluminum is a process that uses an electromagnetic field to heat up and join aluminum parts with a filler metal. It has some advantages over torch and furnace
金属の熱処理に関する110の質問 (パート4)
60.What are the main defects in the ingot? Microsegregation.Macrosegregation 1) normal segregation 2) inverse segregation 3) specific gravity. Inclusion and porosity.Shrinkage cavity and porosity 61.What principles should be followed in