高周波熱処理：溶射角度の急冷の重要性
The problem is raised that in some scanning quenching applications, the step axis undergoing proper austenitizing may appear soft at the inner Angle of the diameter transition. Solution: Sometimes, when
誘導溶接ろう付けとは？
Induction welding brazing is a form of welding that uses electromagnetic induction to heat the workpiece. The welding apparatus contains an induction coil that is energized with a radio-frequency electric
高周波熱処理技術が応用されている11大産業とは？
1. Automobile manufacturing industry Induction heat treatment technology has been most widely used in the automobile industry, and the induction heating quenching of automobile parts has risen to about 50%
高周波焼入れ焼戻しとは？
Tempering after quenching is commonly used to increase the stiffness and toughness of steel, eliminate internal stress, improve dimensional stability and uniformity, but has little effect on the hardness of
高周波熱処理後の部品の不規則な変形を修正するにはどうすればよいですか?
Problem: Irregular deformation of parts after induction heat treatment Solutions: 1. Check the quenching fluid concentration, flow rate, and pressure. 2. Ensure proper quenching uniformity. 3. Check the coaxiality of
高周波熱処理後の表面硬度偏差の考えられる要因は何ですか?
Possible factors for surface hardness deviation The problem is that during the heating and quenching cycle, the heat treatment personnel notice that the surface hardness of the quench shaft changes
中間周波数誘導熱処理生産ラインの設計方法は?
Intermediate frequency induction heat treatment line equipment introduction The secondary coil of an intermediate frequency quenching transformer is an AC induction coil. The workpiece is placed in an ac induction
製品カテゴリ
今すぐお問い合わせ